Skip to content
Rising Damp Repairs & Damp Proof Course Injections in Poole
Discover how Proofterior treated rising damp in a Poole home with full DPC injection, wall restoration, radiator reinstatement, and clean site management from start to finish.
Understanding the Problem: Rising Damp in a Poole Property.
A homeowner located in Poole area reached out after spotting damp patches, bubbling paint, and crumbling plaster near the skirting boards. Our inspection confirmed rising damp, a common issue in coastal Dorset homes where ground moisture travels up through brickwork because of a failed or missing damp proof course (DPC).
Without intervention, rising damp can damage plaster, encourage mould growth, and even weaken structural timbers. Our goal was to stop the moisture at its source and return the property to a healthy, dry condition.
Step 1: Detailed Damp Survey & Diagnosis
Identifying the Source Before Any Treatment Begins.
Before any repair work begins, our qualified damp specialists perform a detailed survey using advanced diagnostic tools:
Moisture mapping with electronic meters to locate affected zones.
Salt analysis to identify nitrate and chloride deposits caused by capillary moisture.
Thermal imaging to detect hidden moisture paths behind skirting and radiators.
Inspection of external ground levels to rule out bridging or poor drainage.
Assessment of existing DPC integrity and plaster condition.
This revealed that the existing DPC was no longer effective, allowing water to rise through the wall base.
We mapped out the damp-affected zones, checked internal plaster conditions, and confirmed that a chemical DPC injection system would be the most reliable solution for long-term protection.
Step 2: Safe Preparation & Radiator Removal
Creating Clear Access for a Complete Treatment.
To fully access the affected wall, we safely isolated and removed the radiator, ensuring all pipework and fittings remained undamaged. This allowed our specialists to treat the wall behind the radiator — an area often overlooked in standard damp repairs.
Protective sheeting was laid across flooring, sockets were safeguarded, and furniture was moved for safety. This careful preparation reflects one of the key benefits of our service — from radiator removal to reinstatement, providing a complete, hassle-free experience for homeowners.
Step 3: Brickwork Repairs & DPC Injection
Installing a Long-Term Barrier Against Rising Damp.
With the wall stripped and cleaned, our team repaired damaged mortar joints and replaced any deteriorated bricks. We then drilled precise holes along the mortar line and injected a silane-based chemical DPC cream.
This cream penetrates the masonry and forms a water-repellent layer, blocking moisture from rising through the structure. During this phase, all plaster debris and brick dust were safely bagged and removed for proper waste management, keeping the workspace clean and environmentally compliant.
Step 4: Replastering & Radiator Reinstatement
Restoring the Wall to a Smooth, Protected Finish
After the DPC injection cured, we applied a damp-resistant plaster system to replace salt-contaminated render. Once the wall dried, we reinstalled the radiator, testing all fittings to ensure optimal heating performance.
This all-in-one service means the homeowner didn’t need to hire separate trades — Proofterior handled the full process, leaving the wall ready for decoration and the heating system back in place.
The Result: Dry, Restored & Ready for Years of Protection
This Poole property is now completely dry, with a new chemical damp proof course protecting against rising damp. The replastered wall blends seamlessly with the rest of the room, and the radiator was safely reinstalled without visible disruption.
Thanks to Proofterior’s end-to-end service, the homeowner gained both structural security and peace of mind — all with minimal downtime and no mess left behind.
Frequently Asked Questions About Damp Proofing in Poole.
1. What are the common signs of rising damp in Poole homes?
Cost depends on the cause, access, and finish. A damp survey in Southampton identifies whether you need a chemical DPC, membrane, ventilation upgrade, or external repairs. Once the survey is complete, you receive a fixed, written quote so there are no surprises.
Do you offer guarantees for your damp proofing work?
Yes. All Proofterior treatments and services come with a written guarantee, supported by moisture readings and photographic documentation. Our team is Checkatrade and Google 5-Star Rated, giving homeowners confidence that their property is protected for the long term.
How long does damp proofing last?
When the source of moisture is treated and the right system is installed, damp proofing is designed to last for many years. Longevity improves with simple upkeep, clear gutters, sound pointing, and good ventilation. We include aftercare so results stay stable.
Do you cover areas outside of Poole?
Yes. Proofterior serves Poole, Bournemouth, Southampton, Wareham, Wimborne, Christchurch, and across Dorset. Our team understands local construction styles and weather conditions that commonly lead to damp problems in coastal and inland properties alike.
Seeking expert advice can further clarify specifics related to your property’s unique needs. Professional assessments are invaluable in providing tailored solutions. Always consult with a specialist for the most accurate guidance.
Ready to protect your Poole property?
Book a damp survey in Poole with Proofterior. Our local damp specialists deliver clear diagnosis, tidy repairs, and long-lasting proofing that keeps homes dry, healthy, and comfortable.